IR Receiver Module:
XIR Easy Kit:
XIR Pro Kit:
XIR Easy Kit V2:
XIR Programming Cable - Serial (Also has wires attached):
XIR Programmer Cable - USB:
Connection made from the Front Panel wires to the XIR unit and also in the bottom left corner of the picture the connector where the IR Module connects.
In this picture you will notice the connection made from the XIR unit to the XBOX motherboard.
There are 2 wires coming from the molex power connector to the XIR Unit, these are for power and to determine if the xbox is on or off.
A batch of XIR boards:
Very first prototype I built. The battery was to bring the voltage to 5v because the IR Module I was using didn't work with 3.3v (Final Version does not need a battery)