Control of D0 Installation Guide

XIR Kit v2 (green board):
You will have to solder a wire from the XIR board to the XBOX Motherboard.


Solder one end of the wire to the hole in the middle of the XIR. The left hole of the two holes where it says "D0-R".




The other end of the wire you must solder to D0 on the xbox motherboard.

For full compatibility, the XIR must be the only unit connected to D0 (this means if the modchip is connected to D0, it must be disconnected).


For exact information on D0 locations you can visit Xbox-Scene.com